OXRS Docs

Getting Started Guide

A great adventure awaits those using the OXRS platform, and with the help of this guide you'll be able to pick your adventure.

Notice

These docs are work in progress, if you have any issues getting things setup drop us a message on the SuperHouse Discordopen in new window

Choose Your Adventure

Pick Your

  • IO options
  • Controller(s)
  • Display(s)
  • Cases --- rack mount or 3D printed?
  • Firmware, the basic flashing / updating guide

IO Options

Controllers

Displays

Touch Screen Displays

A tutorial guiding intial firmware installationon the OXRS Touch Panel ESP32 device can be found here.

Cases

Firmware

WIP - to be updated soon

For basic loading of firmware, it's recomended that if firmwware is already loaded to use OTA. otherwise it's recomended to use esptooy.py or espflasher and with those 2 programs you can flash teh required bin file. for editing and uploading the raw firmware with arduino or platformIO check out the advanced guide

with esptool.py the cmd line is listed below: (this is an example for esp32)

The last item in the cmd is the name of the bin file to load.

esptool.py --chip esp32 --port "COM9" --baud 921600 --before default_reset --after hard_reset write_flash -z --flash_mode dio --flash_freq 40m --flash_size detect 0x10000 OXRS-SHA-StateMonitor-ESP32-FW.ino.esp32.bin