0.91" 128x32 OLED

I2C Display

128x32 OLED Display

This is a very basic and common I2C display. Devices using the OXRS Sensor library have built-in support for this display. Some items have 3D printable cases designed to hold the Adafruit version of the display. The cheaper AliExpress version of the display can still be used, but a 4 wire JST SH connector will have to be soldered in place, ideally without a pin header installed on the display to save height.

Supported Firmware

Supported Libraries

  • ESP SENSOR Library Link

Where to Buy

Compatible Hardware